LOCKFORMER TRIPLEX CLEATFORMER

This is one of the most flexible Rollformers ever designed for the HVAC industry. It is equipped with S-Slip and Drive on the inboard rolls which make the cleats. The machine design has two inboard and two outboard forming positions allowing bearing support on both sides of the profile. The top plate and roll assembly are split into three zones with each having special design details like knurled rolls and angled guides to keep material moving through the machine in a straight line. These zones also can be adjusted by the operator to meet the requirements of a wide variety of gauges. With nine (9) forming stations, the Triplex Cleat Former can form multiple gauge sheet metal into “S” and drive cleats on the inboard forming positions and up to twelve (12) auxiliary roll set profiles on the outboard forming positions at speeds averaging 100 fpm. Standard with Lockformer quality construction, this machine has a 5HP industrial motor, high precision needle-type bearings, heavy 3/4″ chassis plate, case-hardened and ground roll shafts, and an arc-welded steel stand protected with Lockformer’s top quality primer and paint finish. All the paint on this machine is original. If you feel you need a new TRIPLEX please contact Mestek Machinery directly, sometimes they will have one in stock. MAKE US AN OFFER ON THIS TRIPEX AT 800-753-0393. PLEASE NOTE THE $25,400 ON A NEW TRIPLEX WOULD NOT INCLUDE THE HEMMING ROLLS!!!