This is a well used power cleatbender, sold "as is", functions, but could use some TLC. New Power Cleatbenders available from stock. Call 800-753-0393 It can ship common carrier on the pallet it's ...

The LION 1836 Cleatbender was manufactured with the highest quality material and workmanship. • This machine has a capacity of 18 gauge mild steel and lighter. It cannot accept heavier material. • ...

Flagler #34-200 offers two a Hybrid Powered Cleatbenders a 30″ and a 36″, both have pneumatic clamping followed by hydraulic bending. This Cleatbender forms perfect cleats in 1.7 seconds making it...

Description 30″ Open Throat Cleat Folder 20 Gauge capacity, cycle time of 1.7 seconds, pneumatic table for stronger holding power when clamping the metal, but with a motorized bending process. Als...

This is a Lion 1836-2 Cleat bender with two positions. It will allow your men to turn drives with ease with this 18-gauge capacity machine! Fully rebuilt by Michigan Service Center, this machine ha...

Lockformer cleat benders are tools designed to easily manage the task of forming the cleat hem. We sell a variety of Lockformer cleat benders, including 18”, 24”, and 30” manual cleat benders, bend...

The unit comes with a 3 H.P. electric motor, 115/208-230V, 1,725 RPM. We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with...

The manually operated Roper Whitney Cleat Bender quickly forms cleat edges and flanges on rectangular ductwork without set-up or adjustment. In seconds, an operator can use the upper handle to form...

This unit is a little rough, but still functions. We are blowing it out. We can ship it common carrier, no warranty on this unit.

We have a 30" available for immediate delivery. Delivery possible, wired 230-V 3-Phase. This video is of a similar model of machine, BUT not of the machine in the photos. Make an offer. Fully refur...

Tennsmith’s CB30 cleat benders are manually operated tools that form uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and ...

Tennsmith's cleatbenders are manually operated tools that form uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lo...

18" Manual Cleatbender, delivery possible.

This is a very nice 30" Cleatbender on factory Stand. Ready to ship.

Make us an offer on this 18" cleatbender on a stand.

We normally have these in stock for immediate shipment from one of our warehouses. The cleatbender shown in the photo has the optional $150 stand. These brakes quickly form a uniform drive cleat ed...

New Tin Knocker No 30 Power Cleat Bender 30”x 22 Gauge This Powered Cleat Bender is just another Tin Knocker model designed to increase speed and efficiency in the sheet metal shop. If you’re old ...

This is a hydraulic 30" Cleatbender by Welty-Way. Call for additional information. PRICED TO SELL!