Roll Formers
Stock #: 8448
WHY A DUCTFORMER? This is why, Ductformer Rollformers are built in St. Louis, Missouri, U.S.A. alongside the Automated Metal Fabrication Systems of Custom Rollform Products Inc. The design engineer...
Slitters & Slitting Lines
Stock #: 8442
This is a used Schlebach compact Slasher slitter / cut-to-length with a capacity of 16-gauge x 4 ft. with the optional guillotine shear. This unit will make 5 cuts of 24ga and is equipped with a PL...
Beader
Stock #: 8440
This is a 16-gauge Power Beader. These are the most cost effective way to stiffen ductwork. It's thought to be as much as 5 times faster than cross-braking. This as with all Lockformer equipment is...
Gore Lockers
Stock #: 8433
Combining two machines into one, the Sport Plus offers a Flanger/Swager which will flange one side of a cylindrical gore and swage the connecting side of the next gore with a flip of a switch. The ...
Spiral Pipe Machine
Stock #: 8426
This is the popular Spiral Helix Model 200-L and it is loaded with dies. This machine WAS NOT in a manufacturing facility. Price shown is NEGOTIABLE. There is a GORELOCKER and LOTS of coiled metal ...
Stock #: 8405
Lockformer 20 Gauge Super Speed Pittsburgh with Auxiliary ACME Rolls Mounted Outboard
Pittsburgh
Stock #: 8404
This Lockformer 18 Gauge Pittsburgh Machine has 7 forming stations and is equipped with Drive Cleat rolls and the first roll slits the metal to width then rollforms a perfect drivecleat. It makes t...
Rollformer
Stock #: 8397
The Engel 1240 Standing S Slip Rollformer is a machine used for roll forming. It has 12 shafts and can form 20-gauge sheet metal into a 1-1/8" bar slip1. The machine is equipped with inboard and ou...
Stock #: 8383
This Lockformer 8900 Cleatformer has a bent leg with 9 forming stations with one (1) inboard forming position for the Flat “S” Cleat and two (2) outboard stations for Auxiliary Roll Sets. It is a s...
Stock #: 8380
This is a Machine Makers 1250-18ga slit / cut-to-length machine, that was new in 2020 and has less than 50 hours of run-time on it. The previous owners decided not to run coil and stick with sheets...
