Filters
United States (65)
Apron Brakes (25)
Brakes (5)
Cheek Benders (8)
Cleat Benders (17)
Crimpers (11)
Elbow Machines (5)
Folding Machines (22)
Hand Brakes (2)
Hand Seamers (1)
Press Brakes (16)
More…
ACCURPRESS (1)
ADVANCE (1)
ATEK (1)
AUTOMEC (1)
CIDAN (8)
DUCTFORMER (2)
ELECTRABRAKE (1)
ENCO (1)
ENGEL (4)
FASTI (1)
More…
Sort By
This is a super nice Accurpress Hydraulic Press brake. If this is too small for your needs, email us we have other Accurpress Brakes available at our warehouse. Accurpress manufactures models up to...
60T
Tonnage
HYD
Type
6ft
Overall Length
4.6ft
Between Housings
The DSC roll-forming machine takes HVAC ductwork that has previously been formed into “L” or Fully Wrapped Duct Sections, ot even large duct that has been fabricated in 4 individual pieces, applies...
Advance AutoFold Duct Seam Overview: The DCS roll-forming machine takes HVAC ductwork that has previously been formed into “L” or Fully Wrapped Duct Sections, ot even large duct that has been fabri...
Atek’s Bantam Press Brakes are recognized worldwide as proven performers giving more years of service in the field than any comparable unit. The rugged lever weldment absorbs torque generated by of...
The CNC 9x9 backgauge control system is a simple-to-use 9 bend, single axis system that was developed as a low cost solution to be used with Automec’s series of backgauges for pressbrakes. The syst...
General Specifications: Type Hand Brake Model No. SB-814 Capacity, Mild Steel 14 ga. Capacity, Stainless Steel 18 ga. Bending Length 96" Overall Dimensions (L x W x H) 145" x 56" x 65" Weight Appro...
--
Capacity
14ga
Capacity (ga)
8ft
Overall Length
--
Capacity
18ga
Capacity (ga)
8ft
Overall Length
This 8' x 18-gauge needs nothing but a new paint job. She doesn't look great, but it works as it should. Please notice both ends are good without broken handles. We will be painting this machine, t...
--
Capacity
18ga
Capacity (ga)
8ft
Overall Length
Handbrake parts, new, never used.
--
Capacity
18ga
Capacity (ga)
8ft
Overall Length
Dreis & Krump CHICAGO Model BPU 4816-4 Box & Pan Hand Brake If you’re interested in one of our models, simply Add It To Your Cart and one of our experts will contact you within 24 hours. Model Numb...
--
Capacity
16ga
Capacity (ga)
48.5in
Overall Length
ONLY NEW AVAILALE AT THIS TIME
8' x 16-gauge Straight Hand Brake, ready to work.
--
Capacity
16ga
Capacity (ga)
8ft
Overall Length
CIDAN folding machine K25 is a fast and easy to use machine, made in a sturdy all-welded steel construction with cast iron side frames for stability. K25 is built for continuous running under the m...
Folding: Bending sequence During the folding sequence the blank rests on the sheet support table. A gauging system positions the part to the bend line. The upper and lower beam clamp the blank. Dur...
CIDAN F32 is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam ...
1.5mm
Max Thickness
16ga
Max Thickness (gauge)
126in
Overall Length
This 14-gauge Combi Beam CIDAN power folder is the strongest metal folding machine of its kind. Equipped with welded side frames for strong stability, twin drive folding and upper beams, and eccent...
2mm
Max Thickness
14ga
Max Thickness (gauge)
126in
Overall Length
The CIDAN machine model F Series is extremely quick and easy to use, built in a sturdy all-welded construction. The F Series is built for continuous running under the most demanding conditions. The...
2mm
Max Thickness
14ga
Max Thickness (gauge)
126in
Overall Length
FUTURA PLUS adds a further development to our FUTURA series, and with the increased capacity it is possible to fold e.g. 11 ga thick sheet at 10 foot lengths. • Like model FUTURA the FUTURA PLUS...
0.0598in
Max Thickness
16ga
Max Thickness (gauge)
122in
Overall Length
Cidan 10' x 14-ga CNC Folder
Folding MachinesStock #: 8207
Used - Good
MSRP: $110,000.00 USD
$55,000.00 USD
This 2008 CNC folder is available for purchase and shipment EARLY IN 2023. Customer has updated to new machinery.
--
Max Thickness
14ga
Max Thickness (gauge)
157in
Overall Length
This CR-TDFC BRAKE is in stock and priced to sell. It allows you to perform 90° (and under 90°) bending operations on mild steel including sections with preformed flanges such as TDC-F & TDF-C styl...
0.048in
Capacity
18ga
Capacity (ga)
5ft
Overall Length
FAST ACCURATE OPERATION The TDFC Brake is designed specifically for bending the 90 degree bends on rectangular duct work. It is an extremely efficient tool to use for bending straight duct joints a...
This new concept in sheet metal forming gives you much more freedom to make the shapes you want. The machine is very different from ordinary folders because it clamps the work piece with a powerfu...
This is a brand new, NEVER USED STILL IN THE CRATE, 24-inch x 20-gauge straight bench model Enco brake. Please call or email us for delivery information and pricing. These are perfect for VAN use...
--
Capacity
20ga
Capacity (ga)
2ft
Overall Length
This Model 1836 Cleat Folder is a 18-gauge x 36" high-speed cleatbender. With a capacity of 18 gauge or lighter, these folders are every shop's answer to tired workers. General Specifications: Type...
--
Capacity
18ga
Capacity (ga)
36in
Overall Length
Engel Bendall Power Brake
Press BrakesStock #: 8061
Used - Needs Work
MSRP: $34,000.00 USD
$3,500.00 USD
This is a Engel Bendall that once was the standard brake in all HVAC shops in the USA. This one needs some work, but has plenty of bends left in it. This has a capacity of 10' x 16-gauge mild steel...
This unit has been sold, BUT we have the exact same UNIT in a NEW machine. Call us. We offer two other brands of new cleatbenders.
This is a well used power cleatbender, sold "as is", functions, but could use some TLC. New Power Cleatbenders available from stock. Call 800-753-0393 It can ship common carrier on the pallet it's ...
FASTI Model 221 127" x 13-gauge CNC Folder with Goats Foot Tooling & 10' Backgauge
Folding MachinesStock #: 7940
Used - Excellent
$59,900.00 USD
Max Thickness 0.098" Max Thickness (gauge) 13 gauge Overall Length 127.5" Control CNC (CFP120)
0.098in
Max Thickness
13ga
Max Thickness (gauge)
127.5in
Overall Length
Flagler 30″ Wide x 20-gauge Cleatbender #34-200
Cleat BendersStock #: 7949
New - Build-To-Order
$14,950.00 USD
WE ARE CURRENTLY OUT OF STOCK ON THIS MACHINE, BUT WE HAVE A NEW UNIT COMING IN. CALL FOR DETAILS. Flagler #34-200 offers two a Hybrid Powered Cleatbenders a 30″ and a 36″, both have pneumatic cla...