ROPER WHITNEY 1016 HANDBRAKE

This is a 1998 1016 Roper Whitney Connecticut hand brake. These are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability. With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches. Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thicknesses or radii. Other adjustment features include: - leveling screws and lock nuts on the pedestals; - jack screws and tensioner bolts on the apron; - truss rods on the apron, base and upper beam; - replaceable nose bar and apron inserts. Removable apron angle and insert permit 1/4-inch reverse bends in lighter material. - Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. - The hinge pins are high-tensile, alloy steel. Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes. This machine has a bending capacity of 16 gauge up to 10 feet long and was purchased new and only bent roofing trim it's entire life. The rust in the scratches in the paint is from being used in a unheated shop in Western Pennsylvania. Come see it and test it in our warehouse in Braddock, PA 15104. Call us or email us at sales@sheetmetalmachinery.com