ATEK BANTAM Pneumatic Press Brakes

Adjustable Stroke Depth Control is provided by the screw stop for precise repeatability. Raise the adjustable bed and shorten the ram stroke to maximixe productivity while reducing air consumption and minimizing the pinch point for safer operation.

Ram Speed Control via an infinitely variable valve allows instant adjustment of air flow to the dual cylinders. A minimum setting creates a creep mode for setup, or select any other position to safely match ram speed with your job.

Safety Hooded Foot Pedal controls all ram motion. Fully depress control pedal for down stroke. Slightly release pedal to stop advancing the ram. Completely release pedal at any time and the counter-balanced ram automatically retracts to the top of the stroke. For added safety, the ram retracts if air supply is removed.

Modular FRL Unit is standard on all models to condition air supply to pneumatic components Modular FRL Unitfor long life. The unit consists of an adjustable filter/regulator module with pressure gauge, adjustable flow lubricator module and a three-way lockable shut-off valve. The valve is vented to relieve downstream pressure in the off position per OSHA guidelines. Keyed padlock and lockout tag are included.
Variable Tonnage Control provided through the modular filter/regulator/lubricator unit delivers twelve or twenty-four tons of ram force to form up to 3/8″ or 1/2″ at maximum pressure. Lower the pressure to suit the job, reduce air consumption and preserve tooling.

Every Atek Bantam is designed and built with quality and attention to details. Ram guides are simple to adjust and provide years of service. All critical pivot points are heat treated and equipped with grease fittings. Special bushing material is engineered for high loads to support the rocking lever pivot shaft. Critical Details
Our fully Pneumatic Press Brakes require minimal service. Designed for simplicity, there are few moving parts to wear out – no motor, clutch or brake to maintain or replace.

Adjustable Die Space handles numerous tool sets and reduces or eliminates the pinch point. Per OSHA guidelines, a die space gap of 1/4″ or less is not a pinch point and provides the safest operation method. Loosen the bed and raise or lower it with the large bed elevating screws. Leveling of bed to ram is easily accomplished using this feature.

12 Ton:
Rated @ 90 PSI
Note: Maximum back gauge depth is reduced by 2 inches when equipped with micro-adjustable gauge option.
*12 ton, 100 lbs less without floor stand.
Note: Width between housings, add 1/4″.

24 Ton:
Rated @ 90 PSI
Note: Full 21-1/2″ back gauge depth possible only on sheets 7″ narrower than maximum width. Maximum back gauge depth is reduced by 2 inches when equipped with micro-adjustable gauge option.
*24 ton, 150 to 250 lbs less without floor stand.
Note: Width between housings, add 1/4″.

Contact us toll free at 800-753-0393 for a discounted price when we ship a unit directly to you from the factory and this includes