Tormec DT-SL1 Stitchwelder

Description

Technical data
Tube diameter: 80 – 1000 mm (under request).

Weld length: 20–1000 mm.
Nota: The ratio of tube length to diameter has an influence on handling.
Material thickness: 0,4 – 1,0 mm.
Material: Mild steel sheet, galvanized sheet and stainless steel.
Overlap: 6 mm.
Welding speed: 3 – 12 m/min.
Power: 50 kVA.
Electrical supply: 3x400V / 50Hz +1PE.
Air Pressure: 5 bar.
Copper wire Ø electrode: 2,0 mm (Not included, specifications attached).
Features:
Welding machine with copper wire electrodes for tubes and segments of mild steel, galvanized and stainless steel.

The compact design allows installation with small footprint.

The optimal combination of updated frequency transformer technology makes it extremely easy to use.

The machine allows interval and continuous welding modes.

The machine is loaded manually; the overlap position is fixed by an convenient 6mm guide.

The welding cycle is completely automatic, which means that the material to be welded is pushed from inside to outside of the welding arm (the segment or tube must be held by hand).

Composición de la máquina:
Compact structure frame
Welding rollers
Device for overlapping the sheet 6 mm
Necessary pneumatic and electro-pneumatic equipment
Control panel to configure welding parameters.
General switch.