Tin Knocker TK 1014B Hydraulic Box and Pan Brake, 10 ft. x 14 ga. - TK1014B
Have one to sell?
ConditionNew
1 available
New
Tin Knocker TK 1014B Hydraulic Box and Pan Brake, 10 ft. x 14 ga. - TK1014B
The Tin Knocker 1014 Hydraulic Box and Pan Brake and Straight Brake brings power, strength and repeatability. Save time and money with TK 1014 Hydraulic Brake.
This model functions as either a finger brake or a straight brake. It features a standard box and pan design and includes an attachable straight nose bar. With a bending capacity of 14 gauge (2 mm) mild steel up to 10 feet, it easily forms light gauge sheet metal within its rated limits. Designed for both manufacturing and maintenance environments, this heavy duty hydraulic leaf brake is a reliable and valuable addition to any metal forming operation.
Features:
Adjustable top leaf, open height adjustment
Two Position Bending Leaf Angle Bar
6” Box Depth when using box and pan fingers
Hardened Tooling, both finger and straight nose bar.
Standard Motorized Back gauge with GO TO positioning
Compact Hydraulic Power Unit with direct pump
Manifold Mounted Directional Valves
Large Cylinder Attached to massive Hinge
Adjustable Clamp Pressure with mechanical overlock and reference scale
STANDARD EQUIPMENT: Removable Nose Bar, Bolted Bottom Bar, Compact Hydraulic Power Unit, Angle Bar, Insert Bar, Oil Level Sight Gauge and 28 Box & Pan Fingers
Control Panel Features: On/Off Key Selector Switch, Bending Leaf Up/Down Pushbuttons, Clamp/Unclamp Pushbuttons, Motor Start Pushbutton, Emergency Stop Push Button, Automatic Cycle Push Button
Electric Foot Switch: Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.
Bend Angle Dial Adjustment: Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends. Adjustable Bending Angle for repeatability with scale
Material Thickness Dial Adjustment: Reference scale for speedier set up when adjusting clamping pressure.
Back Gauge: 25 1/2" travel, rack and pinion type gauge with hand wheel adjustment on right side of machine. Inch/Cm scales. Crossbar Travel, 20 IPM crossbar speed with sheet support rods
Specifications:
Max Bending Length: 120" Inches
Number and Width of Fingers: 6-3", 10-4",10-5" 2-6"
Maximum thickness: 14-gauge mild steel.
Electrical: 3HP, 3PH, 230Volt, 15amp
Dimensions: Approx 150" x 48" x 57"
Shipping Weight: 5,500 lbs.
n Knocker TK 1014B Hydraulic Box and Pan Brake, 10 ft. x 14 ga. - TK1014B
Tin Knocker TK 1014B Hydraulic Box and Pan Brake, 10 ft. x 14 ga. - TK1014B
The Tin Knocker 1014 Hydraulic Box and Pan Brake and Straight Brake brings power, strength and repeatability. Save time and money with TK 1014 Hydraulic Brake.
This model functions as either a finger brake or a straight brake. It features a standard box and pan design and includes an attachable straight nose bar. With a bending capacity of 14 gauge (2 mm) mild steel up to 10 feet, it easily forms light gauge sheet metal within its rated limits. Designed for both manufacturing and maintenance environments, this heavy duty hydraulic leaf brake is a reliable and valuable addition to any metal forming operation.
Features:
Adjustable top leaf, open height adjustment
Two Position Bending Leaf Angle Bar
6” Box Depth when using box and pan fingers
Hardened Tooling, both finger and straight nose bar.
Standard Motorized Back gauge with GO TO positioning
Compact Hydraulic Power Unit with direct pump
Manifold Mounted Directional Valves
Large Cylinder Attached to massive Hinge
Adjustable Clamp Pressure with mechanical overlock and reference scale
STANDARD EQUIPMENT: Removable Nose Bar, Bolted Bottom Bar, Compact Hydraulic Power Unit, Angle Bar, Insert Bar, Oil Level Sight Gauge and 28 Box & Pan Fingers
Control Panel Features: On/Off Key Selector Switch, Bending Leaf Up/Down Pushbuttons, Clamp/Unclamp Pushbuttons, Motor Start Pushbutton, Emergency Stop Push Button, Automatic Cycle Push Button
Electric Foot Switch: Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.
Bend Angle Dial Adjustment: Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends. Adjustable Bending Angle for repeatability with scale
Material Thickness Dial Adjustment: Reference scale for speedier set up when adjusting clamping pressure.
Back Gauge: 25 1/2" travel, rack and pinion type gauge with hand wheel adjustment on right side of machine. Inch/Cm scales. Crossbar Travel, 20 IPM crossbar speed with sheet support rods
Specifications:
Max Bending Length: 120" Inches
Number and Width of Fingers: 6-3", 10-4",10-5" 2-6"
Maximum thickness: 14-gauge mild steel.
Electrical: 3HP, 3PH, 230Volt, 15amp
Dimensions: Approx 150" x 48" x 57"
Shipping Weight: 5,500 lbs.
n Knocker TK 1014B Hydraulic Box and Pan Brake, 10 ft. x 14 ga. - TK1014B
We use cookies to improve your experience. Privacy Policy.