Tin Knocker Model 1014B Hydraulic Brake
Have one to sell?
ConditionNew
1 available
New
The Tin Knocker 1014 Hydraulic Brake brings power, strength and repeatability to any shop. It works as either a box and pan (finger) brake or a straight brake, with an attachable straight nose bar included, and bends up to 14 gauge (2 mm) mild steel at 10 feet.
An electric foot switch clamps and unclamps the top leaf, freeing the operator to load and unload material, and the bend angle dial delivers consistent, repeatable bends. Built for both manufacturing and maintenance environments, the 1014 is a reliable, heavy-duty addition to any metal-forming operation.
Specifications:
Max Bending Length: 120"
Number and Width of Fingers: 6-3", 10-4", 10-5", 2-6"
Maximum Thickness: 14-gauge mild steel
Electrical: 3HP, 3PH, 230V, 15A
Dimensions: Approx. 150" x 48" x 57"
Shipping Weight: 5,500 lbs.
Standard Equipment:
Removable straight nose bar and 28 box and pan fingers (hardened tooling)
Bolted bottom bar, angle bar and insert bar
Compact hydraulic power unit with direct pump and oil level sight gauge
Electric foot switch for clamping
Back gauge with inch/cm scales and sheet support rods
Controls & Adjustments:
Bend angle dial with limit switch for repeatable bends
Material thickness dial for faster clamp pressure setup
Adjustable clamp pressure with mechanical overlock
Adjustable top leaf open height
Two-position bending leaf angle bar
Control panel: key switch, leaf up/down, clamp/unclamp, motor start, auto cycle and emergency stop
The Tin Knocker 1014 Hydraulic Brake brings power, strength and repeatability to any shop. It works as either a box and pan (finger) brake or a straight brake, with an attachable straight nose bar included, and bends up to 14 gauge (2 mm) mild steel at 10 feet.
An electric foot switch clamps and unclamps the top leaf, freeing the operator to load and unload material, and the bend angle dial delivers consistent, repeatable bends. Built for both manufacturing and maintenance environments, the 1014 is a reliable, heavy-duty addition to any metal-forming operation.
Specifications:
Max Bending Length: 120"
Number and Width of Fingers: 6-3", 10-4", 10-5", 2-6"
Maximum Thickness: 14-gauge mild steel
Electrical: 3HP, 3PH, 230V, 15A
Dimensions: Approx. 150" x 48" x 57"
Shipping Weight: 5,500 lbs.
Standard Equipment:
Removable straight nose bar and 28 box and pan fingers (hardened tooling)
Bolted bottom bar, angle bar and insert bar
Compact hydraulic power unit with direct pump and oil level sight gauge
Electric foot switch for clamping
Back gauge with inch/cm scales and sheet support rods
Controls & Adjustments:
Bend angle dial with limit switch for repeatable bends
Material thickness dial for faster clamp pressure setup
Adjustable clamp pressure with mechanical overlock
Adjustable top leaf open height
Two-position bending leaf angle bar
Control panel: key switch, leaf up/down, clamp/unclamp, motor start, auto cycle and emergency stop
We use cookies to improve your experience. Privacy Policy.