Lockformer 18 Gauge Pittsburgh Rollformer

This Lockformer 18 gauge Pittsburgh Lockformer Rollformer has a capacity of 18–22 gauge Pittsburgh at a speed of up to 40-45 feet/minute. It will also slit to width metal to run through the installed Drive Cleat Rolls. Making Drives has never been easier! Call us @ 800-753-0393 for both New & Used options on a 18-gauge Pittsburgh.

Model 14 16 18
Capacity 14-18GA 16-20GA 18-22GA
Depth of Pocket 1/2” 1/2” 3/8”
Forming Speed 35 fpm 40-45 fpm 40-45 fpm
Forming Stations 7 7 7
Hammer over-edge adj. 1/2” 3/8” 3/8”
Drive Double V-Belt Double V-Belt Double V-Belt
Electrics 230/460V 6PH 230/460V 6PH 230/460V 6PH
Motor 5HP, 1800 rpm 3HP, 3600 rpm 2HP, 2600 rpm
Dimensions(LxWxH) 58.5″ x 24″ x 41″ 58.5″ x 24″ x 41″ 58.5″ x 24″ x 41″
Shipping Weight 650 lbs. 625 lbs. 600 lbs.

WE HAVE PITTSBURGH ROLLFORMERS IN STOCK. MOST ARE USED, BUT WE DO STOCK SEVERAL NEW 20-GAUGE PITTSBURGH MACHINES. PLEASE CALL US @ 800-753-0393

People ask, "What all was done to this machine?" Please see below of the list.
Techs removed and replaced ALL: Bearings: Thrust washers; Shims; Setup studs; 2- 5L V belts; New Grease lines: installed new dial screw: installed new opening wheel: machine was cleaned and painted, then the machine was re-assembled and tested and all the profiles were fine tuned. She is ready to WORK