<p>This RH MACH II has been rebuilt and deemed to be in good working order. It is guaranteed, it welds BDEP, CTC, SSP, CP & FTC type fasteners to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 psi air is required. Position a fastener over the insulation and depress the trigger switch. The machine inserts the fastener through the insulation and welds it to the steel.</p>
<p>Some of the features for the Duro Dyne Model RH Pinspotter include: Extra clearance between weld tip and ground bar allows easy handling of all thicknesses of liner up to 2"; Vibrator is capable of feeding fasteners from 1/2" to 1-1/2" in length at production line speed; Precision polished and hardened tracks combined with ground bearings assure trouble free easy movement; Solid state components proven under rigorous shop usage control pneumatic and weld circuitry; Solid state component controls are conveniently located; Quick load storage track and vibratory parts feeder keeps fasteners "ready" at all times; Welding tip glides back and forth along the RH frame eliminating excessive material handling inherent with stationary fastening machines; Five foot throat allows placement of pins 1-1/2" from each end of a five foot sheet without moving the metal.</p>