<!--StartFragment--><strong><!--StartFragment-->This 20 Gauge Pittsburgh Machine has 5 forming stations with one (1) inboard forming position for the 5/16” Pittsburgh Lock and one (1) open outboard station for Auxiliary Roll Sets. This is a stand-alone machine that has a 3/4 HP Motor and runs on 115 Volt, Single Phase Power with 25 FPM running speed. <br><br>This machine IS EQUIPPED with the optional 20-gauge Autoguide Power Flanger <br>Machine.<!--EndFragment-->Model - </strong>Lockformer Model 20 Pittsburgh Lock Rollformer<br><strong>Forming Stations -</strong> 5<br><strong>Capacity -</strong> 20-26 gauge<br><strong>Depth of Pocket - </strong>5/16" Uses approximately 1" of material<br><strong>Hammer Over-edge Adjustability -</strong> 3/8”<br><strong>Forming Speed -</strong> 25 FPM<br><strong>Motor -</strong> 3/4 hp, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM. <em>Other motors available upon request.<br></em><strong>Dimensions -</strong> 36″L x 16.5″W x 41″H<br><strong>Shipping Weight -</strong> 450 pounds<!--EndFragment-->
