NEW CIDAN FOLDERS & SHEARS

Description

The CIDAN machine model F Series is extremely quick and easy to use, built in a sturdy all-welded construction. The F Series is built for continuous running under the most demanding conditions. The machine is adapted for all types of folding of thinner materials. The reinforced side frames insure steady guiding of the clamping beam and folding beam. The clamping beam is eccentric driven which eliminates wear and tear during movement as well as providing the best possible opening and closing speeds. The eccentric drive eliminates adjustment of parameters during the life of machine, which insures long life on the clamping motor. When clamping, the eccentric enables very high clamping pressure, which is a great advantage when closing hems.

CLAMPING BEAM - The clamping beam face is at 45 degrees and the nose bar is positioned at 30 degrees, which enables you to form 146 degrees. The upper nose tooling is made from hard 42CrMo4 steel with a .040” (1.0mm) radius nose. The upper beam is twin driven for true parallel-ism during clamping. This will allow you to accurately form bump radius parts.

GIBING ON UPPER BEAM - Long 21” (533.4mm) phenolic gibing on the clamping beam and side frames allows for stable guiding without deflection.

CNC MATERIAL SENSING - Automatic material thickness sensors prevents machine from over clamping on thick material, prolonging the life of the machine. These sensors are also helpful for clamping soft material, as the control can adjust the clamping pressure between 0 and 100% or by position.

UPPER BEAM CLEARANCE - Upper Clamping beam has 2.24” (57mm) of clearance on both sides of the clamping tool. This allows the option of longer tooling if required. Underneath the clamping beam there is 1.93” (49mm) of relief, this is great for parts that require greater work space such as vented ridge caps.