ADVANCE i-Fold Coil Line

Description

The i-Fold can produce the following: 800-753-0393 for the most information AND BEST PRICE
Flat sheet cut to length blanks
“L” Sections
“U” Sections
Fully Wrapped Duct Sections
The i-Fold offers most of the functionality of a conventional coil line with the advantage of a vastly reduced floor space requirement (6ft 6in x 10ft).
The i-Fold allows the operator to use standard coil widths, in multiple gauges up to 16ga, and manufacture ductwork from a minimum of 5in x 5in.
The fully hydraulic system is controlled by the AutoFold v8 Control System that has been designed specifically for this machine. The input is through a dedicated 14in touch screen controller that utilizes a Windows™ CE platform to run the AutoFold Standard Software Program.
The AutoFold Standard Software includes a Jobs Program.
Ductwork is produced at an average rate of 1 piece every 20 seconds (depending on the size of the duct). The i-Fold retains the same production rate as the larger AutoFold machines.
The AutoFold Standard Software includes a Jobs Program.
7 Roll Leveller System consisting of 2 Entrance Drive Rolls, 3 Leveller Rolls & 2 Exit Bead Rolls.
Shear Blades, 4 sides, upper and lower, for extended life
Maximum Working Gauge: 16ga
Maximum Material Width: 5ft
AutoFold v8 Controller with full AutoFold Windows™ CE Software including make quick, jobs and self-diagnostics programs.
14in Touch Screen Monitor with fittings, mounted on the left or right side of the machine.
One “A” frame coil holder with spindle. (Maximum coil weight 10,000lbs at 5ft wide)
A Pittsburgh machine or Snaplock Rollformer can be ordered as an option with this line.
Lifetime Technical Phone Support