<!--StartFragment-->
<p>The 24-gauge Pittsburgh rollformer has 5 forming stations and 1 inboard forming position. The forming chassis is constructed of 1/2" steel plate. This machine is compact and lightweight and can easily be taken to the job site!</p>
<p>An optional Auto-Guide Power Flanger attachment is available for the 24-gauge Pittsburgh machine. The flanging attachment follows any edge straight on irregular while forming a 7/32 (outside) flange height. Just turn up a starting flange in the table slot, feed materials into the rolls and let go. Handles radii down to 3.25" or 1.375" manually at speeds of 16 - 18 fpm.</p>
<!--StartFragment-->
<ul><li><b>Capacity:</b> 24–28 gauge</li><li><b>Depth of Pocket/Size:</b> 5/16" Uses approximately 1" of material</li><li><b>Other:</b> Width of hammer-over edge adjustable up to 3/8"</li><li><b>Speed:</b> 30–35 feet per minute</li><li><b>Motor/Voltage:</b> 1/3 H. P. 115 volt, 60 cycle, single phase, A. C. 1,800 RPM. </li><li><b>Dimension:</b> 30" L x 13.5" W x 20" H</li><li><b>Weight:</b> 175 lbs</li></ul>
<!--EndFragment-->
<!--EndFragment-->