New
Tinknocker TK No. 30 Power Cleat Bender
Cleat Benders
New Tin Knocker No 30 Power Cleat Bender 30”x 22 Gauge
This Powered Cleat Bender is just another Tin Knocker model designed to increase speed and efficiency in the sheet metal shop. If you’re old enough to remember Engel’s Cleatbenders, then you’ll know this model, because it’s almost a direct copy but with new modern updates on it. It performs cleat bending operations with precision, safety and ease of performance, yet it only requires one man for operation – even on long or clumsy duct components. No holding, supporting or re-positioning of metal pieces is required in cleat forming operations.
Solves problems for cleat duct work requiring insulation. Can perform cleat bending operations in the flat when you are producing “L” shaped insulated duct.
This time saving Tin Knocker unit is like an extra pair of hands. BEST PRICE 800-753-0393 50% off with the purchase of an ADVANCE i-fold
| Capacity (ga) | 22 gauge |
| Overall Length | 30" |
Maximum Capacity 22-gauge mild steel or equivalent
Table top height or working surface height 31 inches
Table top length not including CLEAT BENDER 36 inches
Overall length 49 inches
Maximum width capacity 30 inches
1 HP Motor for 110 Volt, single phase 60 HZ
Approximate shipping weight 650 Lbs.