AUTOMEC CNC99-B Press Brakes | THREE RIVERS MACHINERY
Overview
Type:
Press Brakes
Manufacturer:
AUTOMEC
Model:
CNC99-B
Stock #:
7815
Status:
For Sale
Description

The CNC 9x9 backgauge control system is a simple-to-use 9 bend, single axis system that was developed as a low cost solution to be used with Automec’s series of backgauges for pressbrakes. The system comes with a two year warranty. The typical CNC 9x9 user bends simple parts. The system can be used for single bend “go to” positioning or sequential bending of up to 9 bends with up to 9 repeats of identical bends. The CNC9x9 backgauge system retains the same speed, accuracy, and repeatability as provided by Automec’s higher end controls at a more affordable price. The system also features bend allowance and inch/mm conversion. The operator can display backgauge position, bend number, and cycles per bend. Error messages appear when unattainable dimensions are entered and all backgauge dimensions can be offset ± .999” with one data entry. The CNC9x9 backgauge system consists of a mechanical gauging mechanism, controller, gauge bar, (2) flip fingers, instruction manual, interconnect cables and mounting hardware. The CNC9x9 is also offered as a control only upgrade for our customers looking to replace their old G24 controls. Control Specifications 9 Bends per Job 9 Cycles per bend 1/2" LCD Display Bend allowance ± .999” Gauge Offset - All backgauge dimensions can be offset ± .999” with one data entry. .001” resolution IN/MM conversion Tactile feel pushbuttons 5 Year flash memory backup 20" or 24”Backgauge Input power - 115 VAC ± 10% 50/60 HZ, 1A MAX (Control) Contol size - Height 8 1/3" x Wi

Automec Model CNC99-B Single Axis Press Brake Back Gauge

Automec Model CNC99-B Single Axis Press Brake Back Gauge
Press Brakes