DUCTFORMER TDC/F or TDF/C Air Brake
Box & Pan Brakes including Finger$20,250.00 USD |
This CR-TDFC BRAKE is in stock and priced to sell. It allows you to perform 90° (and under 90°) bending operations on mild steel including sections with preformed flanges such as TDC-F & TDF-C style duct. The brake is powered by external pneumatic air with foot pedal activation. Bend lengths over 60" (1500 mm) are formed by one man resulting in significant time savings. 800-753-0393 for your delivered price.
TDFC Power Brake
The TDFC Power Brake is designed specifically for bending the 90° bends on rectangular duct work. It is an extremely efficient tool to use for bending straight duct joints and fittings for Full Wrapper or L-Shape Duct with TDFC style (F-Style & C-Style) flange connectors. One (1) Operator can quickly and easily slide a part into the machine and align the notches in an instant on the alignment blade located on the bending line. Other types of duct such as Slip and Drive or raw edge duct can also be folded or bent to 90°. The machine can also fold any angle less than 90°.
Capacity | 0.048" |
Capacity (ga) | 18 gauge |
Overall Length | 5' |
Max part Length ——————————–60-5/8" (1580 mm)
Gauge capacity (mild steel)——————18 gauge (1.2mm)
Cycle time (wrap duct , 3 bends)—————-20-25 seconds
Electrical———————————————-110/220/1phase
Air Requirement ———————————–5 CFM, 80 PSI
Call us for a discounted quotation with one of these brakes delivered to your shop at no cost.