Trumpf Trumatic L3030, 3000 Watt Laser
Laser CuttersSheet-W | 60" |
Sheet-L | 120" |
Wattage | 3000 w |
IPM | 3346 cmpm |
X | 120" |
Y | 60" |
Z | 4.5" |
Laser cutting speeds, shown in Inches per minute.
1/2” 18 IPM using oxygen.
3/8” 35 IPM using oxygen.
1/4” 70 IPM using oxygen.
7 Ga. 80 IPM using Nitrogen.
10 Ga. 100 IPM using Nitrogen.
12 Ga. 140 IPM using Nitrogen.
14 Ga. 170 IPM using Nitrogen.
MACHINE CAN BE INSPECTED UNDER POWER.
2- 5′ x 10′ shuttle tables.
Full load current required: 122 Amps
Amp rating of largest motor: 13 Amps
Control voltage: 24 VDC
Air supply: 88 PSI
Nitrogen: 390 PSI
Oxygen: 210 PSI
New resonator installed in 2013.
Approximately 7,000 hours on new resonator.
2,500 actual “beam on” hours of cutting time.